| 
| 
| 
 | 
| 
 |  
|  |  
| 
|  초정밀 초고압 주사기펌프 시스템 
 | 
 |  
|  [MicroPro™ Syringe Pumping System] |  |  
|  |  
| 
| 
 | 0.01 uL/min ~ 10.0 mL/min, 10,000 psi max. |  
| 
 | 무맥류(Pulseless), 초정밀 유량제어 (0.01 µL/min) |  
| 
 | 일체형설계, 온도와 압력보정, |  
| 
 | 단일주사기, 왕복형주사기, 기울기용리, 정압모드 |  |  |  |  | 
|   | 
| 
|   개 요 |  
| 
| 
 | Eldex MicroPro® 펌프는 기존의 하드웨어와  이전의 주사기펌프 디자인의 어려움을 극복하고 극도로  낮은 유속(0.01 uL/min)에서도 정밀하게 유체를 이송합니다. |  
| 
 | 낮은 유속을 필요로하는 마이크로 LC, 캐피러리 LC, LC-MS, FIA 뿐만아니라 바이오분리, 반응액투입 및 시험생산설비등 광범위한 영역에 활용할 수 있습니다. |  
| 
 | Eldex MicroPro® 펌프는 온도조절기능으로 보다 정밀한 유체 이송을 보장합니다. |  
| 
 | 최적의 모듈식 디자인으로 필요에 따라 펌프를 추가할 경우에도 사용공간을 최소화할 수 있습니다. |  
| 
 |  한 대의 MicroPro® 펌프로 3 대의 다른 펌프를 제어할 수 있습니다. 기울기용리 또는 여러대의 펌프를  개별적으로 제어할 경우에도 적합합니다. |  |  | 
|   | 
| 
|   특 징 |  
| 
| 
 | Pulseless Flow ;Eldex MicroPro 펌프의 주된 장점중의 하나는 주사기를 기초로 설계되었기 때문에 맥동(펄스)없이 유체를 이송할 수 있다는 것입니다. 그결과 검출기의 감도는 극미량검출이 가능할 정도로 증대 됩니다.
 |  
| 
 | Flow Reproducibility ;주사기 사이즈와 마이크로스테핑 모터의 최적화로 비교할 수 없는 높은 재현성을 제공합니다.
 |  
| 
 | Pre-pressurization, Flow programming ;보다 진보된 소프트웨어와 함께 사용할 경우 각각의 입력된 유속에서 작동한계압력을 별도로 설정할 수  있습니다. 주입과 흡입의 용도로 사용할 수 있으며, 유속 프로그램을 간단하게 설정할 수 있습니다. 또한, 정량모드(constant flow) 또는 정압모드(constant pressure)로 프로그램할 수 도 있습니다.
 |  
| 
 | Syringe, Valve, Pressure Transducer Options ; 2mL와 10mL 주사기 사이즈가 있으며, 316 스테인레스스틸 또는 티타늄 재질로 되어 있습니다. 용도에 따라 적합한 밸브 옵션을 선정할 수 있습니다. 압력변환기 옵션은 작동한계압력을 설정하거나 정압모드로 펌프를 작동시킬 때 필요합니다.
 |  
| 
 | Temperature Control Option ; 극도로 낮은 유속에서 온도의 작은 변화에도 유속의 안정성은 극적으로 영향을 받기 때문에 주사기의  온도조절이 필요합니다. 최고의 정밀도를 요구하는 분야에 온도조절 옵션을 추천합니다.
 |  |  | 
|   | 
| 
|   규 격 |  
| 
| 
 | System Features ; |  
|   | 
|  No. of syringes controlled
 | : 4. (1 master and up to 3 slaves) |  
|  Modes of operation
 | : single syringe, reciprocating, constant pressure, gradient. |  
|  Wetted Parts
 | : 316 stainless steel, uhmw polyethylene, PEEK. |  
|  Syringe Sizes
 | : 2 mL or 10 mL. |  
|  Position Sensors
 | : 2. |  |  
| 
 | Pump Features ; |  
|   | 
|  Flow Rate
 | : 2 mL syringe:  0.01 - 2,000 µL/min. |  
|   | : 10 mL syringe:  0.05 - 10,000 µL/min. |  
|  Flow Reproducibility
 | : ±.5% typically. |  
|  Set increment
 | : 0.01 µL |  
|  Refill Time
 | : Minimum;  30 seconds, rate and time programmable. |  
|  Maximum Pressure
 | : 2 mL syringe;  10,000 psi (to limit of valves). |  
|   | : 10 mL syringe;  5,000 psi (to limit of valves). |  
|  Gradient Flow Rate
 | : 2 mL syringe;  1 µL/min. |  
|   | : 10 mL syringe;  5 µL/min. |  
|  Gradient Resolution
 | : 1%. |  
|  Gradient Reproducibility
 | : ±0.5% typically. |  |  
| 
 | Program Features ; |  
|   | 
|  No. of steps
 | : 200 (20 per file). |  
|  No. of files
 | : 10 |  
|  No. of cycles
 | : 999 |  |  
| 
 | General Features ; |  
|   | 
|  Dimensions
 | : Single;  16 W x 44 H x 36 cm D, 16 kg |  
|   | : Dual;  34 w x 44 H x 36 cm D, 30 kg |  
|  Electrical
 | : 100/120/230VAC, 60/60/50/Hz |  
|  Remote
 | : Start, stop, hold, 6 contact closures, RS232. |  |  |  | 
|   | 
| 
|   주문정보 |  
| 
| 
 | Single Syringe Pumping System ; |  
|   | 
| 
 | MV10tx | MicroPro 10 mL Single Pump for general purpose  with mechanical valves, 5000psi transducer, temperature control
 |  
| 
 | MV2tx | MicroPro 2 mL Single Pump for general purpose with mechanical valves, 5000psi transducer, temperature control
 |  
| 
 | HPLC10i | MicroPro 10 mL Single Pump for Isocratic HPLC with high pressure active valves, 5000psi transducer, temperature control
 |  
| 
 | HPLC2i | MicroPro 2 mL Single Pump for Isocratic HPLC with high pressure active valves, 5000psi transducer, temperature control
 |  |  
| 
 | Dual Syringe Pumping System ; |  
|   | 
| 
 | HPLC10g | MicroPro 10 mL Dual Pump for binary gradient HPLC with high pressure active valves, 5000 psi transducer, temperature control
 |  
| 
 | HPLC2g | MicroPro 2 mL Dual Pump for binary gradient HPLC  with high pressure active valves, 5000 psi transducer, temperature control
 |  
| 
 | HPLC10r | MicroPro 10 mL Dual Pump for reciprocating  with high pressure active valves, 5000psi transducer, temperature control
 |  
| 
 | HPLC2r | MicroPro 2 mL Dual Pump for reciprocating  with mechnical valves, 5000 psi transducer, temperature control
 |  |  |  | 
|   | 
|  | 
|   | 
|  귀하의 성공적인 연구개발의 동반자가 되겠습니다. | 
*******************************************************************************************************************
동방하이테크상사  
http://www.allpump.co.kr  
서울시 성동구 광나루로6길 35 성수이비즈센터 710호
T)02-457-6292  F)457-6293  dbht@allpump.co.kr
*******************************************************************************************************************
정량펌프, 정밀펌프, 고압펌프, 마이크로펌프, OEM 펌프, HPLC 펌프, 피스톤펌프, 주사기펌프, 실린지펌프, 다이어프램펌프, 다이아프램펌프, 튜브펌프, 튜빙펌프, 호스펌프, 연동펌프, 기어펌프, 기아펌프, 플런져펌프, 부란자펌프, 초정밀펌프, 초미세펌프, 초고압펌프, 밸브, 피팅, 튜빙, 아답터, 크로마토그래피 제품, 연구실험기자재 등