| ||||
The T211 was originally designed to provide feedback information for control of textile machinery. It features a rotary transformer coupled torque sensor and requires AC strain gage signal conditioning such as SensorData’s i200. The optional angle encoder provides precise feedback of shaft position and rotational speed. SensorData’s T211 Sprocket/Pulley Torque Sensor can be provided in a number of different configurations with capacities from 500 to 10K lb-in and rated speeds up to 10,000 rpm. Contact our representative or the factory to discuss your specific requirements. After consultation with a factory representative SensorData will be pleased to provide the customer with a practical solution for his or her special needs for a sprocket/pulley torque sensor. |
SPECIFICATIONS (Subject to change without notice) | |
| Rated Fatigue Capacity | 500, 1K, 2K lb-in |
| Rated Speed | 8,000 rpm |
| Nonlinearity | 0.1% of rated output |
| Hysteresis | 0.1% of rated output |
| Nonrepeatability | 0.05% of rated output |
| Rated Output, typical | 2 mV/V |
| Zero Balance | +/-1% of rated output |
| Temperature Range, operating | -20 to +220 F |
| Temperature Range, compensated | +68 to +220 F |
| Temperature Effect on Output | 0.002% of load/F |
| Temperature Effect on Zero | 0.002% of rated output/F |
| Excitation | 2.8 to 5 VAC rms, 3 kHz to 5 kHz |
| Insulation Resistance, bridge to case | >5000 megohms at 50 VDC |
| Maximum Load, safe (1) | 200% of rated capacity |
| Maximum Load, ultimate (2) | 400% of rated capacity |
| Number of Bridges | 1 |
| Weight | 7 lbs |
| Construction | SAE 4340 alloy steel with satin nickel finish |
| (1) With load centered, maximum torque that can be applied without producing a permanent shift in performance characteristics. (2) With load centered, maximum torque that can be applied without physical damage. | |
