상세설명
- 10 ch 핸디 타입 데이터 레코더
- 전압, 온도, 습도, 로직, 펄스 등 다양한 데이터의 동시 측정
- 2 GB 플래시 메모리 내장 ? 장시간 데이터 측정 및 저장
- USB Memory stick을 이용한 자유로운 데이터의 이동 및 저장
- 기본 10채널 고정형 핸디타입
- 전 채널 isolated, 다양한 Input 지원
- 2GB의 대용량 Flash Memory
- 4.3 인치의 넓은 TFT 컬러 LCD
- USB memory stick 지원, USB Interfac
| Item | Description | |||
|---|---|---|---|---|
| Number of analog input channels | 10 ch | |||
| External input/output | Input *1 | Trigger or Sampling input 1 ch, Logic or Pulse input 4 ch | ||
| Output *1 | Alarm output 4 ch | |||
| Sampling interval | 10 ms to 1 h (in 10ms to 50ms, voltage only and limited channel), External | |||
| Time scale | 1 sec to 24 hour /division | |||
| Trigger function | Action | Start or stop capturing data by the trigger | ||
| Source | Start: Off, Input signal, Alarm, External *1 , Clock, Week or Time | |||
| Stop: Off, Input signal, Alarm, External *1 , Clock, Week or Time | ||||
| Combination | OR or AND condition at the level of signal or edge of signal | |||
| Condition | Analog: Rising, Falling, Window-in, Window-out | |||
| Pulse: Rising, Falling, Window-in, Window-out | ||||
| Logic: Rising or Falling | ||||
| Alarm function | Detecting method | Level or edge of signal | ||
| Condition | Analog: Rising, Falling, Window-in, Window-out | |||
| Pulse: Rising, Falling, Window-in, Window-out | ||||
| Logic: Rising, Falling | ||||
| Alarm output *1 | 4 channels, Output type: Open collector (pull-up resistor 10 kΩ) | |||
| Pulse input function *1 | Accumulating count mode | Accumulating the number of pulses from the start of measurement Range: 50, 500, 5 k, 50 k, 500 k, 5 M, 50 M, 500 M counts/F.S. | ||
| Instant count mode | Counting the number of pulses per sampling interval Range: 50, 500, 5 k, 50 k, 500 k, 5 M, 50 M, 500 M counts/F.S. | |||
| Rotation count (RPM) mode | Counting the number of pulses per second and then it is converted to RPM Range: 50 rpm, 500 rpm, 5 krpm, 50 krpm, 500 krpm, 5 Mrpm, 50 Mrpm, 500 Mrpm /F.S. | |||
| Max. input pulse rate | 50 k pulses/sec or 50k counts per sampling interval, 16 bits counter is used | |||
| Calculation function | Between channels | Addition, Subtraction, Multiplication and Division for analog input | ||
| Statistical | Select two calculations from Average, Peak, Max., Min., RMS | |||
| Search function | Search for analog signal levels, values of logic or pulse or alarm point in captured data | |||
| Interface to PC | USB (Full speed) | |||
| Storage device | Built-in Flash memory (2 giga-bytes), USB memory device *2 | |||
| Data saving function | Captured data | Direct saving of data into built-in Flash memory or USB memory device | ||
| Others | Setting conditions, Screen copy | |||
| Ring capturing mode | Function: ON/OFF, Number of capturing point: 1,000 to 2,000,000 (Size of the capture data will be limited to 1/3 of available memory) | |||
| USB memory device emulation | USB Memory emulation mode (Transfer or delete the file in built-in memory) | |||
| Engineering scale function | Set based on the reference point of the scaled output and input signal for each channel (Voltage measurement: four points are necessary to scale the output, Temperature measurement: two points are necessary to scale the output). | |||
| Display | Size | 4.3 inch TFT color LCD (WQVGA: 480 x 272 dots) | ||
| Formats | Waveform + Digital, Waveform only, Calculation + Digital, Expanded digital | |||
| Operating environment | 0 to 45 °C, 5 to 85 %RH (When operating with battery pack 0 to 40 °C, charging battery 15 to 35 °C) | |||
| Power source | AC adapter (100 to 240 V, 50/60 Hz), DC power (8.5 to 24 V DC, max. 26.4 V) *3 , Battery pack *3 | |||
| Power consumption | 29 VA or lower (when operating with AC adapter, displaying LCD) | |||
| External dimensions (W×D×H) | approx. 194 x 117 x 42 mm | |||
| Weight | approx. 520 g (Excluding AC adapter and battery pack) | |||
