여기에마켓 제품 :: 지산파워텍

Current Transducer
DAT-1/2

 * DEESYS Current transducers have good linearity and low ripple output.
   The elements are totally isolated among input, output, power and 
    others to case.  
 * This ampere transducer provide proportional DC current and 
    voltage output which are not influence by any load resistance, 
    even under very low load condition, accurate output is available with quick 
    response.
 * Transducers are designed to respond to the current value of input 
    but calibrated to root mean square (RMS) reading of pure sinusoid.

Head	Specification
Auxiliary power	AC 110/220V(±10%), 50/60㎐(1.5VA)
Input burden	Less than current 0.5VA, Voltage 0.6VA
Input over capability	Current rated : 1.2 In continuous 2 In 10sec 10 In 3sec Voltage rated : 1.2Vn continuous
Response	Less than 400ms, step change 0~95%
Output ripple	Ripple less than 0.5%Ro peak-peak.(span)
Operating temperature range	-10℃ to + 55℃
Operating humidity	0~99%, non-condensing
Calibrate adjustment	±1% minimum
Zero adjustment	±1% minimum
External magnetic field	Less than 0.01% 100AT/1M center
Dielectric strength	Terminal to case : 4000V AC rms 1minute Input to output : 2000V AC rms 1 minute
Output load	DC current mode : max 10V drop DC voltage mode : max 5mA drive
Surge/Impulse	IEC255-4, 5㎸, 1.2X50㎲, IEC 255-22-1, 2.5kV(1MHz/400Hz)
Case material	ABS resin, DIN rail type

>Standard Product

Model	Output	Source
DAT-1111	DC 4~20mA	1Ø
DAT-1121	1~5V
DAT-1211	DC 4~20mA
DAT-1221	1~5V
DAT-2111	DC 4~20mA	1Ø × 3EA
DAT-2121	1~5V
DAT-2211	DC 4~20mA
DAT-2221	1~5V

* Order made is avaliable except for standard products.

Output	Load Compliance Ω
4~20mA	≤500
1~5V	≤1K