상세설명
|
HP 40 B2 and HP 63 B2 High-performance, reliable vacuum equipment is essential for successful and
time-saving work in many science laboratories. The VACUUBRAND high-vacuum
pumping units satisfy these needs and fulfil practical requirements, while
providing high vacuum to 10-6 mbar. These pumping units consist of an
air-cooled diffusion pump, a two-stage rotary vane pump as a backing pump
(either RZ 2.5 or RZ 6) and all connecting parts, including high-vacuum valve,
ventilation valve and a bypass line. The pumping unit HP 40 B2 with RZ 6
provides higher pumping speed in the pump down phase and is additionally
equipped with an oil mist filter FO. |
 |
Perfomance
Features
- efficient - The powerful rotary vane backing pumps generate the necessary backing pressure so that the diffusion pump can always attain its full pumping speed and an ultimate vacuum of approx. 10-6 mbar (measured with pump fluid DC 704 and cold trap with liquid nitrogen).
- fast - The pumping unit has a high-vacuum valve at the inlet and a rough vacuum line (bypass). This makes it particularly efficient for rapid evacuation cycles.
- clear directions - Smaller experimental set-ups can be mounted directly on the pumping unit. A clearly visible, condensed operating diagram on the housing of the diffusion pump guides your use and helps prevent operating errors. The diffusion pump can only be switched on if the rotary vane pump is running. All valves and switches are operated from the front.
