(UV / VIS / NIR) Macro PL + Raman + Fluorescence Measurement System

1. Excitation Laser Source Options (typical): please, specify a desired laser wavelngth suitable to your spectrum (e.g. UV / VIS / NIR)
 
     A.LDM830100CWA 830nm Solid State Laser
        - Output power: 100mW
        - Mode: TEM00
        - Beam diameter: 1.25mm +/- 10%
        - Beam Quality M2: <1.2
        - Beam Ellypticity: <1.1:1 (5M)
        - Polarization: >5:1 vertical, >100:1 on request
        - Power stability: <0.5% h
        - Noise 0Hz-100MHz: <3.5% peak to peak
        - Supply voltage: 85-245Vdc, 50/60Hz
        - Features: optional computer controlled power, safety-Interlock,

     B. FKL532.50.CWA.L 532nm Solid State Laser
        - Output power: 50mW
        - Mode: TEM00
        - Beam diameter: 1.0mm +/- 10%
        - Beam Quality M2: <1.3
        - Beam Ellypticity: <1.1:1 (5M)
        - Polarization: >5:1 vertical, >100:1 on request
        - Power stability: <3.5% h
        - Noise 0Hz-100MHz: <3.5$ peak to peak
        - Supply voltage: 24Vdc, 2Amp
        - Features: computer controlled power, safety-Interlock, LCD working hours display remote connector
        - PC interface: RS232

     C. IK3501R-G, 325nm HeCd Laser 
        - Output power : 50mW
        - Air cooled TEM00 mode 1.2mm beam dia
        - 0.5mrad beam divergence
        - Includes power supply

     D. Other lasers wavelength(s) (e.g. 266nm, 488nm, 405nm, 514nm, 785nm) are also available

2. Excitation Light Source:
     A. DL450-XE 450W Xe Arc Lamp
         - 450W Xe lamp with vertical type lamp housing
         - Spectral range: 260-2000nm, Ozone free lamp
         - 190-2000nm Ozone generation available
         - Collimating lens (35mm dia.)
         - LPS-450-500 current controlled lamp power supply and 20kV ignitor
         - All necessary cables

3. SCP200 Macro Sample Chamber
     - 40mm dia. FusedSilica PL/CX lens
     - Beam diverting mirror
     - Variable ND filter
     - Bandpass filter (3nm FWHM for three laser sources)
     - 10 mm aperature beam dump, raman edge filter.( for three laser source)
     - Sample holder
     - X-axis rack and pinion dovetail stage for focusing

4. MonoRa 324i Monochromator
     - Stepping motor scanning system with 32-bit microprocessor control
     - Power supply and Monochromator Instruction manual included
     - Monoscan  basic control software included
     - Resolution: 0.09nm @ 435.8 nm (1200gr/mm grating) 10 um slit
     - Focal length: 320mm
     - Optical path: Czerny-Turner type, Imaging Spectrograph by Toroidal Mirrors. 
     - Aperture: f/4.2,
     - Grating Turret: dual-grating (68 mm x 68 mm) or triple turret
     - Interface: RS232 & USB Standard
     - Accuracy: +/- 0.2nm
     - Repeatability: +/- 0.04nm
     - Drive-step size: 0.0025 nm with 1200gr/mm
     - Dispersion: 2.5nm/mm
     - Focal-plane size: 26mm wide x 14mm high
     - Fixed diverter mirror assembly for entrance side port
     - Exit selection diverter mirror assembly for exit ports
     - Micro adjustable slit assembly for entrance and exit ports
        0 to 5mm(10micrometer increment/decrement unit)
     - 32 bit control board
     - Gratings: 
       1) 3-1200-250H, 1200G/mm, 300nm blaze, Holographic Grating
           190-800nm Optimal Wavelength Range, Al+MgF2 coating
       2) 2-1200-700H, 1200G/mm, 700nm blaze, Holographic Grating  
           400-1200nm Optimal Wavelength Range, Al+MgF2 coating

5. DV401A-BV CCD Detector
     - Sensor Option: Back illuminated AR coated for optimal performance in VIS
     - Active Pixels: 1024x127
     - Pixel Size: 26x26
     - Image Area: 26.6x3.3
     - PC Interface: USB 2.0
     - Peak QE: 95% @ 600 nm
        20% @ 350 /900 nm
     - Wavelength range: 200- 1000 nm
     - Min Operating Temp: -75
     - Pixel Well Depth: 1000000
     - FVB: 75
     - Read Noise: 4
     - Read-out Rate: 0.1
     - Dark Current @ -70: 0.02
     - P25 Shutter & SD166 Shutter Driver
     - Andor SOLIS application program

6. MOSF-6 Motorized Order Sorting Filter Wheel Assembly
     - 6 holes filter wheel w/3 cut-off filters (please specify)
     - Standard order sorting filters: 400nm, 500nm, 600nm

7. SC100A Macro Sample Chamber
     - 25mm dia. Fused Silica lens, Biconvex, 3 pcs included (please specify focal length)
     - Adjustable sample holder (cuvette cell or wafer)
     - Cutoff filter & filter holder
     - Manual Rotation Sample Holder for angle scan with 0.1 degree resolution

8. S-050(or025)-TE2-H TE cooled Si Photodiode
     - 200-1100 nm  2.5 mm or 5 mm dia.
     - Included TE cooled power supply

9. PBS-020-TE2 two Stage TEC PbS Detector
     - Operating Temperature: 22 to ?30 deg C by two stage TEC