ㆍEconomical CO2 Sensor Module combined
ㆍTemp.& Humidity Measurements
ㆍAccuracy : Approx ±10% ±1℃ ±3%
ㆍLife Expectation : ≤10years
ㆍInterface : AVO / Relay / TTL UART / I2C
ㆍPower : DC 6~18V
ㆍSize : 55Ⅹ35Ⅹ15mm
ㆍIndoor Air Quality control
(Air Conditioning/Cleaning/Ventilation)
Approx. 10%, 1℃, in office home and factories
ㆍClimate Control System
ㆍAll applications for CO2&Temp&Humidity Control
| Product | Model | X-300TH | ||
|---|---|---|---|---|
| Sensing Method | Solid State Electrolyte CO2 Sensor Module | |||
| CO2 | Data | Detection Range | 300~2,000/5,000/10,000ppm(Optional) | |
| Accuracy | Approx.±10% | |||
| Resolution | 1ppm | |||
| Time | Response Time | 2min to 90% for diffusion sampling method | ||
| Warm up time | less than 30min | |||
| Sampling Interval | 1sec. | |||
| Life Expectation | <10years (＠Self-Calibration Mode) | |||
| Operating & Storage Environment | Operating Temp. | 0~50℃(sensor will function down to -20℃) | ||
| Operating Humidity | 0~95% RH(Non-Condensing) | |||
| Storage Temp. | -40~70℃ | |||
| Power | Power Supply | DC 6~18V (6~12V Recommended) (Unprotected against surges and reverse connection) | ||
| Current Consumption | Normal : 70mA Peak : 140mA(@9V) | |||
| Outputs and Communication | Analog OUT | CO2 | VDC 0~3.3V(Linear Output) | |
| Relay OUT | Digital Low/High output | |||
| Digital OUT1 | CO2, Temp, Humidity | TTL Level RS-232 (Driver Optional) | ||
| Digital OUT2 | I2C | |||
| MechanicalPerformance | Output Connector | 7pin/6pin(2.54mm pitch Socket) | ||
| Dimensions(L*W*H) | Approx. 55*35*15mm | |||
| Holes | 3.2? 3EA | |||
| Temperature/Humidity | Operating Range & Accuracy | 0~85℃, Approx.±1℃ | ||
| 0~95%(Non-Condensing), Approx.±3% | ||||
| Calibration | Method | Manual and self | ||
Note !
This product is not designed and authorized for use as a critical component in life support applications wherein a failure or malfunction of the products may result in injury or threat to life.
EXSEN Co. reserves the right to make changes without notice to this product to improve reliability, functioning or design.
