여기에마켓 제품 :: 인재과학상사

Two-Syringe Infusion Pump This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application

Features

Holds one or two syringes, 10 ml to 140 ml each
Backlit LCD display
Knob locks/unlocks drive block for effortless, drag-free manual adjustment
Simple menu-driven setup:
- select syringe size from displayed table
- dispense volume
- dispense flow rate
Continuous dispense volume display
Preset volume control and automatic shut-off
Choice of unit selection
Settings can be reviewed or changed during operation
Stall detection
Last settings stored in permanent memory
Built-in RS232C interface for computer "daisy chaining" up to 100 pumps
TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
Optional multi-step keypad programmable feature (KDS200P)

Specifications Flow Rates

Pump Type	Infusion
Max. No. of Syringes	Two
Syringe Size	`10` m`l to 140 ml`
Dimensions	11 x 9 x 5.5 in. 28 x 23 x 1414 cm
Weight	9 lb (4 kg)
Linear Force	40 lb (18 kg) min.
Advance Per Micorstep	0.165 micron (1/16 step)
Max Step Rate (1/2 Step)	1600
Min Step Rate	1 step / 30 sec.
Accuracy	± < 1%
Reproducability	± 0. 1%
Audible Alarm	(Optional) **

Syringe	Minimum	Maximum
10 ml	0.001 ml/h	22.98 ml/min
25 ml	0.001 ml/h	60.68 ml/min
50 ml	0.001 ml/h	105.8 ml/min
100 ml	0.001 ml/h	212.6 ml/min
250 ml	0.001 ml/h	527.6 ml/min
500 ml	0.001 ml/h	1.06 ml/min
1 ml	0.001 ml/h	2.203 ml/min
3 ml	0.001 ml/h	7.36 ml/min
5 ml	0.001 ml/h	14.33 ml/min
10 ml	0.001 ml/h	20.91 ml/min
20 ml	0.001 ml/h	36.19 ml/min
30 ml	0.001 ml/h	46.49 ml/min
60 ml	0.001 ml/h	70.57 ml/min
140 ml	0.001 ml/h	147 ml/min

NOTE: This syringe pumps are for laboratory use only. They have not been approved by the FDA for human clinical use.