신품 판매중
오일필터
가격 가격협의
모델명 오일필터
제품분류 환경/환경설비
업체명 (주)다인에스텍
전화번호 0504-0668-5614
등록일 25.04.14
판매자의 다른 제품 판매자의 제품 모두보기
세퍼레이터 세퍼레이터
Separator Depth 오일 세퍼레이터 필터
Separator Filters 오일 세퍼레이터 필터
에어필터 에어필터
DHR Series 냉동식 에어라인시스템
상세설명

- W type (Full-flow oil filters)
 
MANN-FILTER Nominal
flow rate
[l/min]
[gpm]		 Dimensions in mm [dimensions in inches] Filter fineness
acc. to ISO 16 889
[μm (c)]* with		 Non-
return
valve
[bar]		 By-pass
valve
[bar]		 Permissible
operating
pressure
[bar]		 Type
(see
page
9)
d1 d2 d3 d4 d5 h 50%
separation		 99%
efficiency
W 712/20 15
(3.96)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 80
(3.15)		 76
(2.99)		 79
(3.11)		 20 >50 - 2.5 14 C
W 712/4 20
(5.28)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 80
(3.15)		 76
(2.99)		 93
(3.66)		 20 >50 0.12 2.5 14 C
W 712/52 15
(3.96)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 80
(3.15)		 76
(2.99)		 79
(3.11)		 14 38 0.12 2.5 14 C
W 719/14 25
(6.61)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 80
(3.15)		 76
(2.99)		 123
(4.84)		 20 >50 0.12 2.5 14 C
W 719/30 25
(6.61)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 80
(3.15)		 76
(2.99)		 123
(4.84)		 14 38 0.12 2.5 14 C
W 920 30
(7.93)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 95
(3.74)		 20 >50 0.12 2.5 14 A
W 920/7 30
(7.93)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 95
(3.74)		 14 38 0.12 1.5 14 B
W 930 30
(7.93)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 114
(4.49)		 20 >50 0.12 2.5 14 A
W 930/21 30
(7.93)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 114
(4.49)		 14 38 0.12 3.0 14 B
W 940 50
(13.21)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 142
(5.59)		 20 >50 0.12 2.5 14 A
W 940/51 (13.21) G 3/4" 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 142
(5.59)		 14 38 - 2.5 14 B
W 950 60
(15.85)		 1"-
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 170
(6.69)		 20 >50 0.12 2.5 14 B
W 950/17 60
(15.85)		 1"-
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 170
(6.69)		 14 38 0.12 1.6 14 B
W 962/2 75
(19.82)		 1"-
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 210
(8.27)		 14 36 0.12 2.5 14 A
W 962/6 75
(19.82)		 1"-
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 210
(8.27)		 20 >50 0.12 2.5 14 F
W 1160 50
(13.21)		 M 30x2 93
(3.66)		 104
(4.09)		 110
(4.33)		 108
(4.25)		 178
(7.01)		 14 38 - 2.5 14 A
W 11 102 100
(26.42)		 1 1/8"-
16 UN		 93
(3.66)		 103
(4.06)		 110
(4.33)		 108
(4.25)		 260
(10.24)		 20 >50 0.12 2.5 14 A
W 11 102/4 75
(19.82)		 1 1/8"-
16 UN		 93
(3.66)		 103
(4.06)		 110
(4.33)		 108
(4.25)		 260
(10.24)		 14 36 0.12 2.5 14 A
W 1374/2 85
(22.46)		 G 1 1/4" 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 177
(6.97)		 20 >50 - - Suction range
- 0.8		 E
W 1374/4 85
(22.46)		 1 1/2"-
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 177
(6.97)		 20 >50 - 0.2 Suction range
- 0.8		 E
W 1374/6 85
(22.46)		 1 1/2"-
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 177
(6.97)		 15 36 - 0.2 Suction range
- 0.8		 E
W 13 145/1 180
(47.56)		 1 1/2"-
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 302
(11.89)		 20 >50 0.12 2.5 14 E
W 13 145/6 180
(47.56)		 M 42x2 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 302
(11.89)		 14 36 - 2.5 14 E

* In comparison to the previously used calibration, the new calibration with the same filter results in a lower filter fineness with small particles.
 
- W type, WD type (Full-flow oil filters for use with compressors)
 
MANN-FILTER Nominal
flow rate
[l/min]
[gpm]		 Dimensions in mm [dimensions in inches] Filter fineness
acc. to ISO 16 889
[μm (c)]* with		 Non-
return
valve
[bar]		 By-pass
valve
[bar]		 Permissible
operating
pressure
[bar]		 Type
(see
page
9)
d1 d2 d3 d4 d5 h 50%
separation		 99%
efficiency
W 712/65 20
(5.28)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 80
(3.15)		 76
(2.99)		 93
(3.66)		 20 >50 0.12 2.5 14 C
W 719/37 30
(7.93)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 80
(3.15)		 76
(2.99)		 123
(4.84)		 20 >50 0.12 2.5 14 C
W 920/51 30
(7.93)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 95
(3.74)		 20 >50 0.12 2.5 14 A
W 920/40 35
(9.25)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 95
(3.74)		 14 38 0.12 1.2 14 B
W 930/35 40
(10.57)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 114
(4.49)		 20 >50 0.12 2.5 14 A
W 940/55 55
(14.53)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 142
(5.59)		 20 >50 0.12 2.5 14 A
W 950/24 70
(18.49)		 1" -
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 170
(6.69)		 14 38 0.12 1.6 14 B
W 962/14 75
(19.82)		 1" -
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 108
(4.25)		 210
(8.27)		 14 38 - 2.5 14 B
W 962/18 100
(26.42)		 1" -
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 108
(4.25)		 210
(8.27)		 5 19 0.12 2.5 14 B
W 1170 70
(18.49)		 1" -
12 UNF		 93
(3.66)		 71
(2.80)		 110
(4.33)		 108
(4.25)		 227
(8.94)		 14 38 0.12 1.2 14 C
W 11 102 100
(26.42)		 1 1/8" -
16 UN		 93
(3.66)		 71
(2.80)		 110
(4.33)		 108
(4.25)		 260
(10.24)		 20 >50 0.12 2.5 14 C
WD 962/21 65
(17.17)		 1" -
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 212
(8.34)		 4 10 - 2.5 25 E
WD 13 145/8 190
(50.20)		 1 1/2" -
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 302
(11.89)		 15 38 - 2.5 20 E
WD 13 145/10 190
(50.20)		 1 1/2" -
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 302
(11.89)		 <3 7 - 2.5 20 E
WD 13 145/14 210
(55.48)		 1 1/2" -
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 302
(11.89)		 4 10 - 2.5 20 E

* In comparison to the previously used calibration, the new calibration with the same filter results in a lower filter fineness with small particles.
 
- WD type, WH type (Full-flow oil filters)
 
MANN-FILTER Nominal
flow rate
[l/min]
[gpm]		 Dimensions in mm [dimensions in inches] Filter fineness
acc. to ISO 16 889
[μm (c)]* with		 Non-
return
valve
[bar]		 By-pass
valve
[bar]		 Permissible
operating
pressure
[bar]		 Type
(see
page
9)
d1 d2 d3 d4 d5 h 50%
separation		 99%
efficiency
WH 945/1 70
(18.49)		 1 3/8" -
12 UNF		 - - 97
(3.28)		 94.2
(3.71)		 152
(5.98)		 7 22 - - 35 E
WH 945/2 70
(18.49)		 1 3/8" -
12 UNF		 - - 97
(3.28)		 94.2
(3.71)		 152
(5.98)		 4 11 - - 35 E
WH 980 100
(26.42)		 1 3/8" -
12 UNF		 - - 97
(3.28)		 94.2
(3.71)		 240
(9.45)		 7 22 - - 35 E
WH 980/1 100
(26.42)		 1 3/8" -
12 UNF		 - - 97
(3.28)		 94.2
(3.71)		 240
(9.45)		 4 11 - - 35 E
WD 724/6 25
(6.61)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 80
(3.15)		 76
(2.99)		 138
(5.43)		 11 28 - 3.5 35 E
WD 920 25
(6.61)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 97
(3.82)		 20 >50 - 2.5 25 E
WD 940 50
(13.21)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 144
(5.67)		 20 >50 - 2.5 25 E
WD 940/2 50
(13.21)		 3/4" -
16 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 144
(5.67)		 14 38 - 3.5 25 E
WD 950 60
(15.85)		 1"-
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 172
(6.77)		 20 >50 - 2.5 25 E
WD 950/2 60
(15.85)		 1"-
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 172
(6.77)		 15 36 - 2.5 25 E
WD 962 75
(19.82)		 1"-
12 UNF		 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 212
(8.35)		 20 >50 - 2.5 25 E
WD 962/9 75
(19.82)		 M 24x1.5 62
(2.44)		 71
(2.80)		 96
(3.78)		 93
(3.66)		 212
(8.35)		 6 22 - 2.5 25 E
WD 1374 95
(25.10)		 1 1/2" -
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 177
(6.97)		 20 >50 - - - E
WD 13 145 180
(47.56)		 1 1/2" -
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 302
(11.89)		 20 >50 - 2.5 20 E
WD 13 145/4 180
(47.56)		 1 1/2" -
16 UN		 100
(3.94)		 111
(4.37)		 140
(5.51)		 136
(5.35)		 302
(11.89)		 14 38 - 2.5 20 E

* In comparison to the previously used calibration, the new calibration with the same filter results in a lower filter fineness with small particles.
 
- WD type, WH type (Full-flow oil filters)
 
MANN-FILTER Nominal
flow rate
[l/min]
[gpm]		 Dimensions in mm
[dimensions in inches]		 Filter fineness
(full flow) acc.
ISO 16 889
[μm (c)] * with		 Filter fineness
(partial flow) acc.
ISO 16 889
[μm (c)] * with		 Non-
return
valve
[bar]		 By-
pass
valve
[bar]		 Permissible
operating
pressure
[bar]		 Type
(see
page
9)
d1 d4 d5 h 50%
separation		 99%
efficiency		 50%
separation		 99%
efficiency
WP 914/80 14
(3.70)		 M 24x1.5 103
(4.06)		 102
(4.02)		 81
(3.19)		 20 >50 14 38 0.12 1 10 C
WP 928/82 11
(2.91)		 1" -
12 UNF		 93
(3.78)		 93
(3.78)		 120
(4.72)		 20 >50 5 19 0.12 - 14 E
WP 1144 26
(6.87)		 3/4" -
16 UNF		 110
(4.33)		 108
(4.25)		 145
(5.71)		 14 36 <3 6 0.12 2.5 14 C
WP 1169 45
(11.89)		 M 30x2 110
(4.33)		 108
(4.25)		 213
(8.39)		 14 36 <3 6 0.12 2.5 14 C
WP 1170 4.5
(1.19)		 M 22x1.5 110
(4.33)		 108
(4.25)		 227
(8.94)		 - - <3 15 - - 14 C
WP 11 102 6.5
(1.72)		 1 3/8" -
16 UN		 110
(4.33)		 108
(4.25)		 260
(10.24)		 - - <3 15 - - 14 C

* In comparison to the previously used calibration, the new calibration with the same filter results in a lower filter fineness with small particles.
 
비슷한 제품
FL009 멸균백
CAFU-A02 이동식 유해가스 정화기 국소배기장치
소화기보관함 소화기보관함
사류형 임펠러 사류형 임펠러
Y-Branch 각형닥트
견적 요청하기
견적 상세보기