상세설명
FEATURES
제품특징:
- 1채널 200W급 BLDC 모터 제어기
- Digital Hall Sensor만을 사용한 BLDC 모터 구동가능
- Analog Hall Sensor 또는 엔코더를 사용한 BLDC모터 구동가능
- Real-Time 위치/속도/전류제어 기능
- 다중모터제어 통신방식(RS232/485/CAN)
- User Programmable Sequence 제어 기능
- 외부입출력 : 3 Analog/Digital I/O port
- 넓은 전원입력 범위
FUNCTION
| CUBE-BL2408-SMD | |||
| Number of Motors to Drive | 1 ea | ||
| Nominal Supply Voltage | 24V | ||
| Min / Max Supply Voltage | 10V / 30V | ||
| Continuous Coil Current Amplitude(1) at Ta=25℃, 20KHz PWM | 8A | ||
| Maximum Momentary Coil Current Amplitude | 16A | ||
| PWM Frequency | 20KHz ~ 80KHz | ||
| Control Output and Method | current / speed upto 40000 RPM, sine PWM | ||
| Position Sensor | analog Hall IC only | ||
| Back EMF Reducing Resistor | not available | ||
| RS232C / RS485 / CAN | RS232(~115.2Kbps), RS485(~1.25Mbps), CAN(~1Mbps) | ||
| Among RS485 and CAN, only one can be selected by command. | |||
| External I/O | total 3 input or output (some analog and some digital) | ||
| Operating Ambient Temperature | 0℃ ~ 50℃ | ||
| Size (L×W×H, without case) | 65mm x 39mm x 17mm | ||
| Weight (PCB and Bottom Heat Sink) | 40g | ||
| Comment (1) Depends on Additional Heat Sink and Ambient Temperature and PWM frequency. | |||
