| Measurement modes |
LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode |
| Measurement parameters |
Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q |
| Measurement range |
100 mΩ to 100 MΩ, 12 ranges (All parameters are determined according to Z) |
| Display range |
Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ±(0.000000 [unit] to 9.999999G [unit], Absolute value display for Z and Y only
θ : ±(0.000° to 999.999°), D : ±(0.000000 to 9.999999)
Q : ±(0.00 to 99999.99), Δ % : ±(0.0000% to 999.9999%) |
| Basic accuracy |
Z : ±0.08%rdg. θ: ±0.05° |
| Measurement frequency |
4 Hz to 5 MHz (10 mHz to 100 Hz steps) |
| Measurement signal level |
V mode/CV mode (normal mode):
50 mV to 5 Vrms, 1 mVrms steps (up to 1 MHz),
10 mV to 1 Vrms, 1 mVrms steps (over 1.0001 MHz)
CC mode (normal mode):
10 μA to 50 mArms, 10 μArms steps (up to 1 MHz)
10 μA to 10 mArms, 10 μArms steps (over 1.0001 MHz) |
| Output impedance |
Normal mode: 100 Ω
Low impedance high accuracy mode: 10 Ω |
| Display |
5.7-inch color TFT, display can be set to ON/OFF |
| Measurement time |
0.5 ms (100 kHz, FAST, display OFF, representative value) |
| Measurement speed |
FAST/ MED/ SLOW/ SLOW2 |
| Functions |
DC bias measurement, Comparator, Panel loading/saving, Memory function |
| Interface |
EXT I/O, RS-232C, GP-IB, USB communication, USB memory, LAN |
| Power supply, consumption |
90 to 264 V AC, 50/60 Hz, 150 VA max. |
| Dimensions, mass |
330 mm (12.99 in) W × 119 mm (4.69 in) H × 307 mm (12.09 in) D, 5.8 kg (204.6 oz) |
| Supplied accessories |
Power cord × 1 |
|
