신품 판매중
접촉식 변위센서
가격 가격협의
모델명 DK805S
제품분류 전기/계측
업체명 스포스
전화번호 0504-0668-1780
등록일 24.05.24
상세설명

 

Specifications

*1 Values in parentheses show those of type B.

*2 Excluding the interpolation box and connector

*3 When Φ4 mm tube is used in the right angle type

*4 Excluding interpolation box and connector

*5 There are some differences in the shape and dimensions from the previous DK800 series models.

Magnescale reserves the right to change product specifications without prior notice.

Model High resolution model General purpose resolution model
DK805SAR, DK805SALR, DK805SAFR, DK805SAFLR, DK805SBR, DK805SBLR, DK805SBFR, DK805SBFLR DK805SAR5, DK805SALR5, DK805SAFR5, DK805SAFLR5, DK805SBR5, DK805SBLR5, DK805SBFR5, DK805SBFLR5
Measuring range 5 mm
Maximum resolution 0.1 µm 0.5 µm
Accuracy 
(at 20 °C)
1 µm p-p 1.5 µm p-p
Measuring force
(at 20 °C)
Upward: 0.35 ±0.25 N
Horizontal: 0.40 ±0.25 N
Downward: 0.45 ±0.25 N
Operating temperature 0 to +50 °C (no condensation)
Storage temperature -20 to +60 °C (90 %RH or less)
Maximum response speed *1 80 m/min (42 m/min) 250 m/min (100 m/min)
Spindle driving Spring push (All model) 
Air drive by vacuum suction is possible (DK805S*LR*)
Reference point response speed Same as maximum response speed noted above
Reference point at 1 mm ±0.5 mm position of spindle movement
Protection grade *2 Straight type: IP67 / Right angle type: IP64 (IP67*3 )
Vibration resistance 100 m/s2 (20 to 2,000 Hz)
Impact resistance 1,000 m/s2 (11 ms)
Power supply DC 5 V ±5 %
Power consumption 1 W
Output A/B/reference point, voltage-differential line driver output (conforming to EIA-422)
Mass*4 Approx. 30 g
Feeler Carbide ball tip, mounting screw M2.5 Steel ball tip, mounting screw M2.5
Output cable length 2.5 m
Accessories Instruction manual, +P M4 x 5 screws (2 pc), tightening nut, clamp spanner, wave washer,
mounting pins 1 each (for DK8**S*F** only), hose elbow (for DK8**S*L** only),
spanner, supplement