덕주코리아 제공 소형 연마기
(칼날/평면/공구)
각종 소형연마기
덕주코리아 취급하는 소형 연마기
1.칼날연마기
2.평면연마기
3.공구연마기
기타 각종 연마기 문의 시 상세 정밀자료 바로바로 제공합니다
문의 덕주코리아 010 2845 4417
문의시 귀사 명함(이메일주소 포함) 제공 바랍니다
1.칼날연마기 모델 MFD400
manual knife grinder
Specification
1 this is a manual model. You need to push the grinding head moveletf and right
2 the down feed system is manual ,working precision is 0.05mm/wheel
3 the working table use clamping table. It used for planer blade and crusher blade.
Model | MFD400 | Motor speed | 2800rpm |
Max sharpening length | 410mm | Motor power | 0.5kw |
Guide length | 600mm | Weight | 45kg |
Size | 740x400x640mm | Stone size | 125x32mm |
2. 평면연마기 MJ7115
INTRODUCTION:
surface grinder 6"*12" surface grinder is designed to grind various horizontal and vertical surfaces of the workpieces by the periphery and end faces of the grinding wheel respectively. It can also grind contoured workpieces with shaped wheel or craftsmanship apparatus. With small dimensions, light wight, smoothly safe operation and convenient maintenance, etc., it can be used in small enterprises, repairing shops, household industry, lab, teaching demonstrations, etc.
surface grinder 6"*12" FEATURES:
1.Integrated grinding head of high quality, high rigidity and accuracy,
2. small size and light weight, easy operation and maintenance,
3. centralized lubrication for oil pump
STANDARD CONFIGURATION
grinding wheel, grinding wheel adaptor,grinding wheel dresser, pad irons, tools, Rolling Guideetc
SPECIAL CONFIGURATION
stand, permanent magnetic chuck, precision flat vise
| SPECIFICATIONS | Metric | Inch |
| Longitudinal stroke | 340mm | 14 |
| Lateral stroke | 170mm | 7 |
| Grinding height | 210mm | 8 |
| Area of table | 152mm×304mm | 6×12 |
| Width of T-slot | 1-12mm | 1-0.47 |
| Cross feed per graduation | 0.02mm | 0.001 |
| Cross feed per round | 2.54mm | 0.1 |
| Vertical feeds per graduation | 0.025mm | 0.001 |
| Vertical feed per round | 1.25mm | 0.05 |
| Roughness | 1.6μm | |
| Grinding wheel | 180mm×32mm×13mm | |
| Power of motor | 0.55kw | |
| N. W. / G.W.of machine | 210/258kg | |
| N. W. / G.W.of stand | 30/54kg | |
| Overall dimension of machineL×W×H | 930×780×730mm | |
| Case dimension of machineL×W×H | 930×780×1480mm | |
| Case dimension of standL×W×H | 720×550×550mm | |
technical parameter:
End mill capacity (dia. Of shank x dia. Of edge x length) | 50 x 225 x 250mm, 2" x 9" x 10" |
Swing over table | 245mm, 9-3/4" |
Longitudinal travel (X axis) | 150mm, 6" |
Cross travel of table (Y Axis) | 75mm, 3" |
Max. Wheel: | 125 x 50 x 32mm, 5" x 2" x 1-1/4" |
Tilt adjustment for wheelhead | 35° -10° |
Air bearing swivel | 360° |
Air bearing stroke | 250mm, 10" |
Table infeed graduation | 0.02mm, 0.001 |
Air bearing graduation | 6.3MPa |
Pipe joint diameter | Z/4" 1 |
Collet fit for spindle | 5C |
Parallelism between two tables | 0.01/100mm, 0.01/100 |
Parallelism of sleeve center line to worktable | 0.01/100 |
Motor speed: 2, 800rpm | 3, 450/2, 580rpm |
Voltage | 230V 110V/1 phase |
Power | 0.25kW 1/3HP |
Frequency | 50Hz |
Max. Stroke of air bearing sleeve: 9"
Collect for work table: 5C
T-shaped slot width for table: 12.7mm
Air consumption: >0.63Mpa
Tracheal joints: 1/4"
Turning angle: 360degree
Parallelism of workhole center line to abse surface: 0.015mm
Radius run out of workhole center line(60mm for hole): 0.015mm
