마이크로 웨이브 레벨 스위치/SLDL 5400 시리즈

■ 작동 원리

무선 감지 마이크로파 레벨 스위치는 송신기와 수신기를 포함합니다. 송신기와 수신기는 대면하여 설치됩니다.
송신기에 의해 방출 된 마이크로파 신호가 물체에 의해 차단되면 수신기는 경보 신호를 출력합니다.
열악한 작업 환경으로 인해 센서 표면이 더러워 지거나 다른 물질에 부착 될 수 있습니다.
마이크로 웨이브가 강하게 침투하기 때문에 센서가 먼지에 쉽게 침투하여 측정을 완료 할 수 있습니다.
따라서, 탄산 칼슘, CDQ 등과 같은 열악한 조건에서의 사용에 특히 적합한 폐기물, 미네랄, 분말, 과립, 아스팔
트 및 기타 매질의 수준을 효과적으로 모니터링하는 데 사용할 수 있습니다.
무선 감지 마이크로 웨이브 레벨 스위치에는 SLDL 5410 사각형 유형, SLDL5420 단일 채널 유형 및 SLDL5430
다중 채널이 포함됩니다.
■ 제품 특징

● SLDL5430 16 채널은 서로 간섭하지 않고 병렬로 작동합니다.
● 24G 전송 주파수는 침투성이 매우 높으며 매달린 자재, 표면 오염, 부유 입자 및 스팀의 영향을받지 않습니다.
● 측정 범위 최대 120m
● 정밀 정렬없이 진동에 영향을받지 않는 원추형 마이크로 웨이브 에너지 분포
● 15 LED 신호 강도, 민감도는 시각적으로 쉽게 표시 할 수 있으며 디버깅하기 쉽습니다.
● 고온 저항 구조, 온도는 CDQ 및 다른 고열 신청 상황을 위해 적당한 1200 ℃까지 일 수있다.
● 간편한 설치, 최소 G1 "스레드 설치 지원
● 보호 등급 IP68
● Exdia (ia G a) IIC T 5 / T6 Gb, 본질 안전 방폭 복합 인증, 칼슘 카바이드와 같은 높은 안전 요구 사항의 적용
    에 적합합니다.
■ 기술 파라미터

                                                   
| 
			 Model  | 
			
			 Transmitter: SLDL5410-S Receiver: SLDL5410-R  | 
			
			 Transmitter: SLDL5420-S Receiver: SLDL5420-R  | 
			
			 Transmitter: SLDL5430-S Receiver: SLDL5430-R  | 
		
| 
			 Supply voltage  | 
			
			 24V DC/AC220V±10%  | 
			
			 24V DC/AC220V±10%  | 
			
			 AC220V±10%  | 
		
| 
			 Detection distance  | 
			
			 <100m  | 
			
			 <120m  | 
			
			 <120m  | 
		
| 
			 Frequency and Antenna power  | 
			
			 24GHZ Zone, within10mV  | 
			
			 24GHZ Zone, within10mV  | 
			
			 24GHZ Zone, within10mV  | 
		
| 
			 Number of channels  | 
			
			 1CH  | 
			
			 1CH  | 
			
			 16CH (homologous) or 1CH  | 
		
| 
			 Transmitting angle  | 
			
			 ≈,±20C (half angle)  | 
			
			 ≈,±20C (half angle)  | 
			
			 ≈,±20C (half angle)  | 
		
| 
			 Response time delay mode  | 
			
			 0.1-10sec. (adjustable)  | 
			
			 Receiver: 10msec delay setting 0.1-10sec  | 
			
			 25mse (set 1-16CH) or 10msec. (set 0CH) delay 0.1-10sec. (adjustable)  | 
		
| 
			 Power on self test time  | 
			
			 Transmitter:≈ ,50sec Receiver: ≈,5sec  | 
			
			 Transmitter: ≈ ,50sec Receiver: ≈,5sec  | 
			
			 Transmitter: ≈,50sec Receiver: ≈,5sec  | 
		
| 
			 Receiving signal power indication  | 
			
			 One of the 15 LED lights bright indicates the receiving power.  | 
			
			 One of the 15 LED lights bright indicates the receiving power.  | 
			
			 One of the 15 LED lights bright indicates the receiving power.  | 
		
| 
			 Sensitivity Setting value indication  | 
			
			 One of the 15 LED lights dark indicates the sensitivity setting value.  | 
			
			 One of the 15 LED lights dark indicates the sensitivity setting value.  | 
			
			 One of the 15 LED lights dark indicates the sensitivity setting value.  | 
		
| 
			 Power  | 
			
			 2VA  | 
			
			 2VA  | 
			
			 2VA  | 
		
| 
			 Operating temperature  | 
			
			 -30C...+70C  | 
			
			 -30C...+70C  | 
			
			 -30C...+70C  | 
		
| 
			 Process temperature  | 
			
			 -40C...+1200C (Thermal insulating parts are required)  | 
			
			 -40C...+1200C (Thermal insulating parts are required)  | 
			
			 -40C...+1200C (Thermal insulating parts are required)  | 
		
| 
			 Maximum Continuous working pressure  | 
			
			 40MPa  | 
			
			 40MPa  | 
			
			 40MPa  | 
		
| 
			 Protection grade  | 
			
			 IP68 (dust proof and water proof)  | 
			
			 IP68 (dust proof and water proof)  | 
			
			 IP68 (dust proof and water proof)  | 
		
| 
			 Communication output  | 
			
			 DPDT Relay and Alarm light output, contactless switch, transistor output, 8mA/20mA two-wire system, Namur output  | 
		||
| 
			 Application field  | 
			
			
  | 
		||
■ 설치 다이어그램

			
  | 
			
			
  | 
		

                                            
                                            
                                            










